Telescopic Steel Covers
Custom steel way covers are made up of Mild Steel or Stainless Steel from 1 to 3mm
Brass guides are used for larger covers. Medium and small covers are supported with non metallic low friction guides.
Depending on speed and size of application can be used for smooth operation
Damping bumpers are used based on machine speed.
Lifting lugs are provided for ease of installation.
Polyurethane Way wipers, guides, rollers and damping elements are interchangeable.
Vertical, Horizontal flat telescopic covers- for economical budget,
Roof shaped vertical & horizontal telescopic covers for higher rigidity and better deflects coolant & scrap
Single side slanting cover diverts coolant in one direction
Assembly and maintenance of Telescopic covers
Orion Telescopic Covers are coated with special oil protecting them against rust and packed with plastic wrapper. It prevents corrosion during transport and storage.
We recommend the outer surfaces of Telescopic covers are oiled prior or immediate after installation
Way Extension brackets should be provided where ever required.
Steel Way Covers should be fixed on machine at compressed condition, Small box should be fastened first and largest box on last.
Mounting surface should be perpendicular to direction of cover travel.
Telescopic covers are not designed to walk on.
Covers should be cleaned periodically and oil should be applied on outer surface to prevent excess wear and corrosion. Do not use air hoses to clean covers, it result in dirt entering inside the cover.
Wipers and guide shoes gets wear it should be replaced periodically.
Identification tag should be provided while sending samples for new cover manufacturing.
While disassembling covers larges box fasteners should be removed first.
Covers should be removed and lifted form machine at compressed position.
Telescopic covers protect guiding & ball screw systems from chips, dust & liquid. We recommend to do telescopic cover service once in every six months. Orion service Engineers replaces eN wipers & C2 wiper lips, Worn-out cover guides , worn-out tracks made up of steel & brass, sliding elements, dampers, plastic rollers, bearing elements, deformed scissor flats, worm out scissor pins malfunctioning travel mechanism & connection brackets. Covers are cleaned straightened to move parallel with respect to axis guides. Covers are mounted with water sealant glue.
We service HWACHEON VT 550R VTL Telescopic covers,